Nemo-equipment MORPHO A Manuel d'utilisateur Page 3

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 8
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 2
Preparing Your Tent
1. Lay out the contents of Morpho AR™ and make sure you
received your tent and the following items: stuff sack, Nemoid™
Foot Pump, eight stakes, guy lines, and repair kit.
3. Inflate the long airbeam as described in the Tent Setup
section. Make sure the Velcro® straps are not too loose or too
tight. They should hold the airbeam to the tent firmly in place
without puckering the airbeam fabric.
4. With the front airbeam installed and inflated, repeat the
process with the short airbeam.
2. NOTE: AIRBEAMS DO NOT NEED TO BE REINSTALLED
EVERY TIME THE TENT IS SET UP. If your airbeams are already
attached, please skip to Tent Setup. If not, stake the corners of
the tent, and connect the long airbeam to the tent using the
Velcrstraps. The long airbeam should be attached along the
black strip closest to the front door.
NOTE: Make sure the inflate valve is on the side near the pump
access zipper.
22
3
NEMO Innovation
3
21
1. Ventilation: all NEMO tents take comfort very seriously. We’ve
developed our own lightweight waterproof breathable fabric,
OSMO™, to provide the best combination of weight, durability
and performance. Morpho AR™ also has two side vents and a rear
scoop vent. The front ExoFly™ also increases ventilation.
2. ExoFly™ Retractable Vestibule: Morpho AR™ features a
unique morphing vestibule. The tent is designed to store gear
inside where it can stay dry and close at hand, but if you need a
temporary vestibule simply unclip and retract the inner tent from
the fly.
3. Setup From Inside: NEMO AirSupported Technology® allows
you to set up the tent from the inside during bad weather. After
staking out your Morpho AR™, get inside and take your time
pumping up the airbeams while staying dry.
4. LightPocket™: most headlamps have a focused beam and
hanging your lamp inside your tent can be frustrating. To make
things easier, Morpho AR™ includes a special pocket for your
headlamp with a light diffusing fabric. Place your lamp in the
pocket with the light facing towards the inside of the tent, and the
LightPocket™ will help cast an even glow throughout the tent
interior.
4
Vue de la page 2
1 2 3 4 5 6 7 8

Commentaires sur ces manuels

Pas de commentaire