Nemo-equipment MORPHO 1 Manuel d'utilisateur télécharger pdf (Page 9)

Connect Pump

Connect the Nemoid™ foot pump to the airbeam valves through

the access zippers. There will be an audible click when the pump

is connected properly.

Stake Corners

Secure the corner anchors by pounding the stakes into the ground

with a rock or hard object. If the ground is too hard, trap the stakes

under a rock or another heavy object.

Inflate Airbeams

To use the Nemoid™ foot pump, make sure the Dump-Check™

Valve is open. Step on the pump body repeatedly until it becomes

difficult to compress.

Tension

Proper tension in your tent shell ensures maximum water shedding

and wind resistance. Once the airbeams are inflated, pull firmly on

the adjustable corner anchors. Add guy-lines for additional strength.

Locate Valves

Remember to leave no trace. Before leaving your campsite take a thorough look

around making sure you have not left anything behind, out of place, or damaged.

To contact NEMO Customer Service

Phone: 800-997-9301

MORPHO 1P

™

INSTRUCTIONS FOR SETUP

Find the airbeam access zippers near base of tent. The airbeam

valves will be directly inside the tent, behind the access zippers.

1 2 3 4 5 6 7 8 9

Pas de commentaire

Nemo-equipment MORPHO 1 Manuel d'utilisateur Page 9