Nemo-equipment META 2 Manuel d'utilisateur télécharger pdf (Page 4)

Setup Guide

1. Secure the corner anchors by pounding the stakes into the ground with a

rock or hard object. If the ground is too hard, trap the stakes under a rock

or another heavy object.

2. Tension the webbing strap straight out from the center of the door,

making sure not to distort the bottom of the tent. Stake the webbing

strap anchor in place. Repeat for the webbing strap on the opposite side

of the tent.

3. Slide the handle of the trekking pole into the reinforced pocket at the top

of the tent. Insert the trekking pole tip into the grommet near the center

of the door. Repeat with the opposite side.

4. Connect the side release buckle on the vestibule to the end of the front

webbing anchor and extend the trekking pole upwards for maximum

tension. Repeat with opposite side.

5. Stake the reflective side vent cords to maximize airflow. Adjust the tension

on the side vents and vestibules to ensure maximum water shedding and

wind resistance.

1 2 3 4 5 6 7 8 9

Pas de commentaire

Nemo-equipment META 2 Manuel d'utilisateur Page 4